Clamp slide and clamps
Combine precision punching, forming, tapping, and high‑quality laser cutting in a single seamless workflow—boost efficiency, cut costs, and eliminate extra setups.
Our punch‑laser combo unites servo‑driven punching and high‑precision laser cutting in one cell. It handles everything from piercing, forming, and tapping to scribing, engraving, and complex contour or large‑hole laser cuts—all without tooling swaps. This fusion of stamping and cutting maximizes flexibility and throughput, delivering a next-generation solution for precision sheet metal manufacturing.
Automatic nesting function
High rigidity heavy duty closed frame
Combined z-axis and y-axis laser station
Laser cutting
Clamp slide and clamps
| Parameter | Value | Unit | Remark |
|---|---|---|---|
| Punching Force | 300 / 400 | kN | Optional |
| Frame Structure | Closed‑type “O” | Furnace‑tempered | |
| Max. Sheet Size | X‑axis 2500; Y‑axis 1250 / 1500 | mm | X‑axis secondary positioning up to 5000 mm |
| Max. Material Thickness | 6.35 | mm | |
| Max. Single‑Punch Diameter | Ø 88.9 | mm | Non‑standard sizes available |
| Punching Frequency | 1800 | hpm | |
| Max. Frequency (1 mm step, 6 mm stroke) | 800 | hpm | |
| Max. Frequency (25 mm step, 6 mm stroke) | 400 | hpm | |
| Die Type | Long‑guide 85‑series international standard dies | ||
| Turret Station Configuration (standard) | 10 × A, 11 × B, 5 × C, 2 × D (with 1 × B & 1 × C auto‑index) | ||
| Number of Clamps | 3 | pcs | |
| Re‑positioning Cylinders | 2 | sets | |
| Control Axes | 6 / 7 | axes | 7‑axis includes Y‑axis tool‑head movement (optional) |
| Worktable Surface | Brush / omnidirectional steel‑ball composite | Cutting zone fitted with copper‑wire brushes | |
| Max. Feed Speed | X‑axis 100; Y‑axis 80; X + Y 130 | m/min | |
| Turret Indexing Speed | 30 | rpm | |
| Positioning Accuracy | ± 0.10 | mm |
| No. | Parameter | Unit | Specification |
|---|---|---|---|
| 1 | Laser Power | W | 3,000 |
| 2 | Maximum Processing Area | mm | 1,250 / 1,500 /2,500 |
| 3 | Cutting Accuracy | mm | ±0.1 |
| 4 | Cutting Speed | m/min | ≤ 40 (1 mm cold‐rolled steel) |
| 5 | Maximum Cutting Thickness | mm | ≤ 3 |
Our turret features a robust, nested structure for enhanced guidance and precise stamping accuracy. It’s offered in 28‑ and 32‑station variants; on the standard 32‑station model, there are:
The turret control axis is driven by a Panasonic servo motor, which synchronizes the upper and lower turrets to ensure highly precise stamping with no positional deviation.
Our turret comes standard with two stations (1B and 1C). The rotating station lets a single die occupy fewer stations, reducing tool setups.
At the laser station, our cutting head features a water-cooled fiber laser that efficiently handles both sheet steel and non-ferrous metals, with reduced power consumption. Its semiconductor‑based, modular design—without resonator optics or warm‑up time—delivers maintenance‑free, ultra‑stable performance that conventional lasers can’t match.
Copper wire slats don’t hold slag, keeping the table clean; they reflect stray laser light to protect the bed; and their high thermal conductivity spreads heat rapidly, preventing warping.
Products manufactured primarily on a punch press with multiple secondary operations, for example:
Louvers
Knock‑out holes
Embossed features (domes, lettering, decorative patterns)
Snap‑fit or clip features
Anti‑slip plates
Hinge cut‑outs
Bridge holes / bridge forming
These parts leverage the punch press’s versatility to perform a wide range of forming, piercing, and embossing tasks in a single setup.
Conventional Factory Workflow (minimum 13 steps):
Material loading → 2. Laser cutting → 3. Part removal → 4. Deburring → 5. Dimensional inspection → 6. Transfer → 7. Material loading → 8. Stamping → 9. Part removal → 10. Deburring → 11. Dimensional inspection → 12. Transfer → 13. Packing & shipping (or next operation)
Staff requirement:
1 Laser operator
1 Press operator
1 Quality inspector
1 Inventory manager
1 Material handler
Total: 5 people
Punch‑Laser Hybrid Factory Workflow (minimum 4 steps):
Inventory feed → 2. Punch‑laser hybrid machine → 3. Dimensional inspection → 4. Packing & shipping (or next operation)
Staff requirement:
1 Skilled operator
market2@rsm-machinery.com
+86 19962866433
+86 13917564315
© 2011~2025 ERSM MACHINERY. All rights reserved
Explore our sheet metal processing range and find your precision manufacturing solution.
WE CAN HELP YOU IN MANY WAYS TO FIND THE SOLUTION FOR YOUR APPLICATION CHALLENGE .
WE CAN HELP YOU IN MANY WAYS TO FIND THE SOLUTION FOR YOUR APPLICATION CHALLENGE .
Download our catalog to check all of our products and data sheet, select the right products for your projects.
