Auto Deburring Machine
For your desired part surface outcomes—including deburring, edge rounding, surface finishing, heavy slag removal, and laser oxide removal. We offer tailored multi-station automatic deburring machines. Bring your required finish specifications to us, and we’ll validate them with a proof-of-concept sample.
Automatic Deburring Machines: Essential for High-Quality Parts
The ERSM automatic deburring machine is designed to remove burrs generated during cutting or punching processes.
Whether processing thin sheets below 3 mm or medium-thick plates of 8–10 mm, machining marks such as burrs , weld spatter, and surface scratches are inevitably left on the metal surface.
Classic Models: SR / SRS
Our classic models — SR, SRS, and SSR are used for applications where burrs are relatively small and edge rounding or chamfering is the primary requirement.
For materials such as aluminum and stainless steel, especially when a brushed surface finish is required, the SRS model is highly recommended.
800SR
800SR is a dry-type deburring machine featuring a wide abrasive belt combined with a four-roller brush system. It is efficient deburring and edge rounding of various metal workpieces.
800SRS
800SRS comes with two wide abrasive belts and one set of 4 roller brushes. It can complete deburring, edge breaking, and hairline finishing in a single pass, efficiently handling multiple surface treatment processes.
1000SRSP
1000SRSP integrates multiple surface treatment technologies, including abrasive belts, roller brushes, and polishing wheels. It delivers full-process precision finishing — from deburring and edge breaking to fine hairline polishing — for a smooth, consistent, high-quality surface every time.
Heavy-Duty Slag Removal + Brushing Machine
This series is built for tough surface defects such as thick oxide scale and weld spatter, as well as for the entire process from rough grinding to fine brushing.
Whether you need heavy cutting, fine finishing, or edge rounding, there’s a setup that gets the job done.
600SS
Equipped with a dual wide abrasive belt configuration, the 600SS is designed to effectively remove heavy burrs such as slag particles, oxide layers, and large edge burrs from metal surfaces.
1300MHS
Designed specifically for removing residual slag from flame-cut or plasma-cut workpieces. A combination of a cleaning hammer unit and a wide abrasive belt enables effective surface impact, loosening and removing stubborn slag.
1600SSR
The core objective of the 1600SSR is to aggressively remove surface defects or perform large-area satin finishing, such as removing thick oxide scale, covering the entire process from rough grinding to fine polishing.
Wet Automatic Deburring for Aluminum, Copper & Other Heat-Sensitive Alloys
Wet deburring machines deliver highly thorough deburring results. The liquid medium can penetrate into tiny gaps, and together with abrasives, effectively remove deep-hole or internal burrs that are difficult to process with dry deburring.
Surface finish can reach Ra 0.2–0.8μm, making it ideal for precision components.
300WMSSB
Equipped with a magnetic worktable, this machine securely holds small and thin workpieces in place. Featuring three processing stations—including two wide abrasive belts and one disc brush unit. It delivers edge rounding and burr removal in a single pass.
1000WSSP
The 1000WSSP uses two sets of wet abrasive belts and one set of wet polishing wheels working in tandem. It can effectively remove mill scale, slag, and burrs from the surface of metal sheets, and achieve hairline finishing and polishing effects.
1000WSBP
1000WSBP first uses a wide abrasive belt to eliminate scratches and burrs on workpiece surfaces. It then performs light edge breaking with a disc brush set and finishes with a polishing wheel set for refined hairline finishing.
Deburring processes
Deburring
Edge Rounding
Heavy Slag Removal
Laser oxide removal
Surface Finishing
Frequently Asked Questions
What thickness range can be processed?
Depending on the model, the machines can process thin sheets (≤3 mm) as well as medium and thick plates (8–10 mm or more).
What processes can be completed in one machine?
The machine can perform deburring, edge rounding, oxide removal, surface brushing, and polishing. Some models enable multiple processes in a single pass.
What is the difference between dry and wet deburring?
Dry processing is ideal for general deburring and edge rounding with easy maintenance. Wet processing is better for heat-sensitive materials like aluminum and copper, reducing dust and improving fine surface finishes.
How do I choose the right model?
Selection depends on material type, thickness, burr size, and required finish (e.g., brushing or polishing). Sample testing is recommended for optimal configuration.
Can the machine run continuously for long hours?
Yes, industrial-grade machines are designed for long-hour continuous operation (e.g., up to 20 hours per day), suitable for high-demand production.
